| 翻訳と辞書 |
| Procaer Cobra ： ウィキペディア英語版 |
Procaer Cobra
The Procaer Cobra was a two seat turbojet powered light aircraft designed and built in Italy and flown in the early 1960s. Only one was completed.
==Design and development==
The Cobra was a cantilever low wing monoplane with a wooden structure covered in plywood, which had an outer thin aluminium skin bonded to it. The single spar wings had a maximum thickness to chord ratio of 16.5%; in plan they were unswept and straight tapered. There was 6° of dihedral. The ailerons were fitted with electrically operated trim tabs and the inboard flaps were hydraulically powered.〔
The small Turbomeca Marboré turbojet engine was mounted in the central lower fuselage, fed from wing root inlets and exhausting under the raised rear fuselage just aft of the wing trailing edge. Fuel was supplied from one fuselage and two wing tanks. The horizontal tail was unswept and straight tapered, with squared tips, the starboard elevator carrying an electrically operated trim tab. The fin and rudder were also straight tapered but swept, with a long, low dorsal strake. The cockpit, positioned forward of the wing, seated two side by side. It had a one piece windscreen and a single piece, rear hinged canopy. The Cobra had a retractable tricycle undercarriage, the wing mounted main members swinging inwards close to the air inlet ducts.〔
The Cobra first flew on 16 November 1960.〔 The construction of a second prototype, the four seat Cobra 480, was begun but not finished.〔
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Procaer Cobra」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|